NOVAFLEX

NOVAFLEX-BANNER

Línea completa de mangueras, juntas de expansión y conectores para manipulación de materiales, petróleo, alimentos, químicos y minería.

Estos productos están disponibles con configuraciones finales personalizables desde bridas incorporadas a extremos perlados.

Todos los productos están disponibles con un amplio rango de compuestos y medidas con mayor resistencia a condiciones de abrasión, calor y corrosión.

Uni-Chem Composite Hoses

Standard Chemical Service

Uni-CHEM™ PG, PS, SG and SS composite hoses are specifically designed for in-plant liquid transfer operations as well as tank truck delivery and rail car loading. Constructed with multiple plies of polypropylene films and polyester vapour barriers. Rated for full vacuum.

Uni-CHEM™ PG, PS

  • P-Polypropylene Coated Steel Inner Helix
  • G-High Tensile Galvanized Carbon Steel Outer Helix
  • S-316L Stainless Steel – Outer Helix

Uni-CHEM™ SG, SS

  • S-316L Stainless Steel – Inner Helix
  • G-High Tensile Galvanized Carbon Steel Outer Helix
  • S-316L Stainless Steel – Outer Helix
  • Maximum length: 100 ft. (10” 50 ft.)
  • Operating Temperature: -40ЉF to +212ЉF (-40ЉC to +80ЉC)Standard Chemical Service

Special Chemical Service

Special Chemical ServiceUni-FLON™ special chemical service hoses are built to meet the demands of today’s highly aggressive media. Superior chemical resistance is achieved with a PTFE, inner liner, reinforced with multiple plies of polyester and polypropylene films. Rated for full vacuum.

Uni-FLONSG

  • S-316L Stainless Steel – Inner Helix
  • G-High Tensile Galvanized Carbon Steel Outer Helix

Uni-FLONSS

  • S-316L Stainless Steel – Inner Helix
  • S-316L Stainless Steel – Outer Helix

Uni-FLON™ PS

  • is available upon request
  • Maximum length:100 ft. (10” = 50 ft.)
  • Operating Temperature: -40ЉF to + 250ЉF (-40ЉC to +121ЉC)
  • Uni-Chem Composite HosesSpecial Chemical Service

Bottom Loading Service

Uni-BL, Uni-OILor Uni-ZENE

Bottom Loading ServiceUni-BLis ideal for transferring petroleum and aromatic products in production, refinery and distribution facilities. Suitable for all hose loading arms in bottom loading operations. Constructed with multiple plies of aromatic resistant films and fabrics. All hoses can be color coded to API color codes. Rated for full vacuum.

Uni-BL

  • G-High Tensile Galvanized Carbon Steel Inner Wire
  • G-High Tensile Galvanized Carbon Steel Outer Helix

TTMA FLANGES ARE STANDARD EACH END

  • Maximum length:100 ft. (10” = 50 ft.)
  • Operating Temperature:

Uni-OIL: -40ЉF to +212ЉF (-40ЉC to +80ЉC)

Uni-ZENE: -40ЉF to +250ЉF (-40ЉC to +121ЉC)Bottom Loading Service


Vapor Recovery Service

Vapor Recovery ServiceUni-VR™ hose is ideal for use in petroleum and petrochemical vapour recovery systems in ship-to-shore, bottom loading and tank truck applications. This hose is lightweight and flexible. Manufactured to meet specification CFR33-154. Rated for full vacuum.

Uni-VR

  • G-High Tensile Galvanized Carbon Steel Inner Helix
  • G-High Tensile Galvanized Carbon Steel Outer Helix
  • Maximum length: 100 ft. (10” 50 ft.)
  • Operating Temperature: -40ЉF to +212ЉF (-40ЉC to +80ЉC)

*Available with a polypropylene coated and stainless steel inner helix.Vapor Recovery Service


Standard Petroleum Service

Standard Petroleum ServiceUni-OILGG standard petroleum service hoses are designed for the transfer of a wide range of petroleum products. Uni-OILGG hoses are ideal for transfer of media from storage tanks and process piping to rail cars or tank trucks. Multiple plies of polypropylene films and fabrics are encased in a polyester vapor barrier for superior operation. Rated for full vacuum.

Uni-OILGG

  • G-High Tensile Galvanized Carbon Steel Inner Helix
  • G-High Tensile Galvanized Carbon Steel Outer Helix
  • Maximum length: 100 ft. (10” 50 ft.)
  • Operating Temperature: -40ЉF to +212ЉF (-40ЉC to +80ЉC)Standard Petroleum Service

Special Petroleum Service

Special Petroleum ServiceUni-ZENEspecial service petroleum hose is designed to handle modern gasoline additives such as MTBE, ethanol and 31% benzene.

Uni-ZENEhoses are built with an effective combination of polyamide, polyester and polypropylene film and fabrics to meet the demands of today’s additives. Also recommended for all JP aviation fuels. Rated for full vacuum.

Uni-ZENE

  • G-High Tensile Galvanized Carbon Steel Inner Helix.
  • G-High Tensile Galvanized Carbon Steel
  • Maximum length: 100 ft. (10” 50 ft.)
  • Operating Temperature: -40ЉF to +250ЉF (-40ЉC to +121ЉC) Outer Helix.Special Petroleum Service

Uni-FLONHT Composite Hose

Uni-FLON™ HT Composite HoseNovaFlex Uni-FLONHT is designed as an upgraded version of NovaFlex’s standard, except that it has a temperature rating of 147°C. The high temperature version has the same Teflon® tube but the reinforcement elements have been upgraded to polyamides and nylons that have superior strength at elevated temperatures permitting the 250psi working pressure to be maintained. Rated for full vacuum.

  • Maximum length: 100 ft. (10” 50 ft.)
  • Operating Temperature: -40ЉF to +350ЉF (–40ЉC to +149ЉCUni-FLON™ HT Composite Hose

Uni-OIL300HT High Temperature Composite Hose

Uni-OIL™ 300HT High TemperatureNovaFlex Uni-OIL300HT is a high temperature version of the standard Uni OIL™ petroleum. This high temperature hose can handle maximum operating temperatures of +300°F (+149°C). The hose design uses a composite of temperature resistant materials and is rated for use with a wide range of petroleum products. Rated for full vacuum.

  • Maximum length: 100 ft. (10” 50 ft.)
  • Operating Temperature: -40ЉF to +300ЉF (–40ЉC to +149ЉC)Uni-OIL™ 300HT High Temperature

NovaFlex Pump-FlexComposite Hose

NovaFlex Pump-Flex™Specifically Designed for the Pump Rental Industry

This rugged suction and discharge hose provides extreme flexibility, light-weight handling and excellent service life. Excellent for the transfer of water and oily water. Absorbs pump pulsations. Less manpower to install than rubber hose. Easy to package for shipping & storage.

  • Standard lengths:10 ft & 20 ft. with CS 150lb. fixed X floating flanges Crimped couplings. Other fitting combinations available. Rated for full vacuum.
  • Maximum length: 100 ft. (10” = 65 ft.)
  • Operating Temperature –40ЉF to +212ЉF (-40ЉC to +80ЉC)

(Not for use in marine dock, crude oil, bunker oil or heavy viscous product applications. For these applications, contact NovaFlex. Consult NovaFlex chemical resistance chart for chemical compatibility before use.)NovaFlex Pump-Flex™


Uni-BioFuel100

Uni-BioFuel™ 100Biodiesel and Ethanol Service

Uni-BioFuel100, a special alternative fuel hose designed to handle all grades of biodiesel, including 100% B100, neat biodiesel and E85 – 85% ethanol fuel blends. Uni-BioFuelhoses are built with a specialized combination of high performance films and fabrics designed to handle today’s fully concentrated alternative fuels. Rated for full vacuum.

Uni-BioFuel100

  • G-High Tensile Galvanized Carbon Steel Inner Helix
  • G-High Tensile Galvanized Carbon Steel Outer Helix
  • Maximum length: 100 ft. (10” = 50 ft.)
  • Operating Temperature –40ЉF to +250ЉF (40ЉC to +121°C)Uni-BioFuel™ 100

LPG Composite Style Hose

LPG Composite Style HoseDesigned for the Transfer of Liquified Petroleum Gas

Manufactured with 316 Stainless Steel inner and outer wires and polyamide reinforcement. Available with crimped on schedule 80 carbon steel or stainless steel threaded ends. Also available with ANSI flanges. All assemblies are hydrostatically tested and are tested for electrical continuity.

  • CSA certified to CAN/CGA-8.1-M86.
  • Operating Temperature: -130°F to +176°F (-90°C to +80°C).
  • Rated for full vacuum.HDC-CPL 3” Aluminum

Roof Drain Hose

Roof Drain HoseNovaFlex® Roof Drain Hose is manufactured for use in tanks with floating roof drain systems. It works well as a flexible elbow as it easily bends to 90°. Also suitable for oil skimmers, suction lines and water separators. Compatible both inside and out for a wide range of PH solutions and chemicals.

  • Diameters: 1” to 4”
  • Lengths up to 100 ft.
  • Operating Temperature: -40ЉF to +212ЉF (-40ЉC to +100ЉC)

Nova-Glow™** Photo Luminescent Hose

With Minimal Exposure to Light Emits Soft Glow for Many Hours

Nova-Glow™ Patented Technology is a photo luminescent safety option for the complete line of Uni-Chem® composite hoses. The Nova-Glow luminescent marker runs the length of the hose, offering both identification and safety hazard benefits at night or in reduced light & visibility conditions.

Nova-Glow™ equipped hoses, after having absorbed minimal light, store enough energy to emit an easily perceived glow that will last throughout the night, is non-toxic and deigned to perform its function for the reasonable service life of the hose.

Nova-Glow™ Hoses can assist in visual sighting of hoses such as those commonly used in dock transfer operations occurring during night hours. Nova-Glow™ hoses, after having absorbed minimal light, store enough energy to emit an easily perceived glow that will last throughout the night.

Nova-Glow™ strip is non-toxic and available on our complete range of composite hoses as well as select rubber hoses.

Integral Safety Feature Photo-luminescent Hose for night time hose transfer operations

Lightweight – Nova-Glow™ does not add any significant weight to hose assembly

Long Service Life – Luminesce for minimum three years.*

*Note: Service life luminescent strip will be shortened if subject to abrasion / wear.

**Patent Protected US 8,667,993 B2, Canada 2,762,243 and others.


Bend Restrictor

A better way to move the tangent/flex point away from the end of the coupling system.

Uni-CHEM® bend restrictors provide increased service life on hose connections. Long lasting ozone resistant EPDM rubber blend. Reduced risk of premature hose wear due to kinking and hose fatigue at tangent point.Bend Restrictor


Uni-CHEM® Composite Hoses With Custom Flotation SystemsUni-CHEM® Composite Hoses With Custom Flotation Systems

PDF
Novaflex – PROMTEC

High Temperature Hose

Novaflex 9155

Novaflex 9155Furnace Door Fiberglass Hose

Designed to withstand extreme heat (1000БЛF) from exterior in open hearth steel mill furnaces.

Carries water to the furnace door.

Construction:

  • Tube: Green SBR non-conductive synthetic rubber. Reinforcement: Plies of polyester tire cord.
  • Cover: 1-ply of white fiberglass fabric
  • Length: 100 ft.
  • Temperature Range:
  • Up to +180БЛF (+82БЛC) internal
  • (+1000БЛF external) (+538БЛC)

Novaflex 9156

Furnace Door Nomex Hose

Designed to withstand extreme heat from exterior in open hearth steel mill furnaces with the added abrasion resistance of nomex.

Construction:

  • Tube: Green SBR non-conductive synthetic rubber.
  • Reinforcement: Plies of polyester tire cord.
  • Cover: 1-ply of yellow nomex fabric.
  • Length: 100 ft.
  • Temperature Range:
  • Up to +180БЛF. (+82БЛC)
  • (+600БЛF external) (+316БЛC)
PDF
High Temperature Hose4

Chemical Hose

Novaflex 4200

Novaflex 4200EPDM Chemical Suction

Hose

A medium duty chemical suction and discharge hose designed to meet the general needs of the industry.

Construction:

  • Tube: Black high grade EPDM
  • Reinforcement: Multiple plies of tire cord with dual helix wire
  • Cover: Blue EPDM
  • Length: 100 ft.
  • Temperature Range: -30БЛF (-35БЛC) to +225БЛF (+107БЛC)
  • Consult chemical resistance chart.
  • Not for steam service. Can be open end steam cleaned

Novaflex 4201

EPDM Chemical Discharge

Hose

A high quality discharge hose designed to transfer common chemicals found in industrial service.

Construction:

  • Tube: Black high grade EPDM
  • Reinforcement: Multiple plies of tire cord
  • Cover: Blue EPDM
  • Length: 100 ft.
  • Temperature Range: -30БЛF (-35БЛC) to +225БЛF (+107БЛC)
  • Consult chemical resistance chart before use.
  • Not for steam service. Can be open end steam cleaned

Novaflex 4203BENovaflex 4203BE

Diesel Exhaust Fluid

(DEF) Transfer Hose

This is a 200psi working pressure rated hose specifically designed to transfer DEF fluids. This suction and discharge hose has an EPDM construction designed to be resistant to the effects of the media transferred. This hose is flexible and excellent for reel applications.

Construction:

  • Tube: Specially formulated EPDM
  • Reinforcement: Plies of cord and helix wire
  • Cover: Blue EPDM
  • Length: 50 ft & 100 ft plain ends/boxed
  • Temperature Range: -40БЛ (-40БЛC) to +210БЛF (+98БЛC)
  • Banding- DEF Hose, 4203BE, 200psi, 210БЛ max temp,
  • urea fluid

Novaflex 4600

Novaflex 4600FEP Chemical Transfer Hose

Recommended for the transfer of products that require a hose tube with the highest level of chemical resistance. The FEP “teflon-type” tube provides that extra margin of safety; with a white chemical resistant back up rubber stock for high adhesions. FEP transfer hose is excellent for tank truck, barge loading, storage tank transfer and in plant applications requiring flexibility and durability.

Construction:

  • Tube: FEP
  • Reinforcement: Multiple plies of polyester tire cord with
  • helix wire
  • Cover: Blue EPDM (available in black, gray, yellow,
  • green, white with 400ft. order)
  • Length: 100 ft
  • Couplings: Use only permanently attached couplings
  • designed for “teflon-type” tube hoses
  • Temperature Range: -40БЛ (-40БЛC) to +300БЛF (+149БЛC)
  • dependant on chemical conveyed. Consult chemical resistant chart. Not for steam service. Can be open end steam cleaned.
  • Non-stock orders – (other color hose covers: green, black, purple, yellow, white, gray) are available and require a 400ft minimum order per I.D. Meets or exceeds the requirements of FDA & USDA under 21 CFR 177, 1550, 3-A sanitary standards 20-15.

Novaflex 4700

Novaflex 4700UHMW Chemical Suction &

Discharge Hose

A lightweight flexible chemical transfer hose designed for almost every common industrial chemical used in industry today. Non-staining UHMW tube.

*WARNING!!

Construction:

  • Tube: Clear Ultra High Molecular Weight polyethylene.
  • Reinforcement: Multiple plies of high tensile textile with dual helix
  • Cover: Green abrasion resistant green EPDM
  • (Available in blue, yellow black and grey, white – with 400ft order)
  • Length: 100 ft.
  • Temperature Range: up to -40БЛF (-40БЛC) to +250БЛF (+121БЛC). Consult chemical resistant chart. Not for steam service. Can be open end steam cleaned
  • Non-stock orders – (other color hose covers: blue, black, purple, yellow, white, gray) are available and require a 400ft minimum order per I.D.

*WARNING! Elevated temperatures can change the chemical resistance rating of 4700. Check the chemical resistance charts published by Novaflex to verify that the chemical to be transferred is rated for use with the UHMWP tube at the temperature & concentrations listed. Most chemicals become more aggressive the higher the temperature, reducing the ability of the tube material to withstand them. Compatibility information is available from Novaflex. If no data exists, it is the users responsibility to determine if the hose is compatible with the chemical to be transferred.

Never use Novaflex 4700 above the ratings listed by Novaflex.


Novaflex 4704 CorrugatedNovaflex 4704 Corrugated

UHMWP Chemical Suction & Discharge Hose

A corrugated version of 4700 designed to offer added flexibility.

*WARNING!!

Construction:

  • Tube: Clear Ultra High Molecular
  • Weight polyethylene.
  • Reinforcement: Multiple plies of high tensile textile with dual helix
  • Cover: Green abrasion resistant green EPDM
  • (Available in blue, yellow black and grey, white – with 400ft order)
  • Length:100 ft.
  • Temperature Range: up to -40БЛF (-40БЛC) to +250БЛF
  • (+121БЛC)Consult chemical resistant chart
  • Not for steam service. Can be open end steam cleaned
  • Non-stock orders – (other color hose covers: blue, black, purple, yellow, white, gray) are available and require a 400ft minimum order per I.D.

*WARNING! Elevated temperatures can change the chemical resistance rating of 4704. Check the chemical resistance charts published by Novaflex to verify that the chemical to be transferred is rated for use with the UHMWP tube at the temperature & concentrations listed. Most chemicals become more aggressive the higher the temperature,

reducing the ability of the tube material to withstand them. Compatibility information is available from Novaflex. If no data exists, it is the users responsibility to determine if the hose is compatible with the chemical to be transferred.

Never use Novaflex 4704 above the ratings listed by Novaflex.


Novaflex 4705

Novaflex 4705UHMW Crush & Kink

Resistant Chemical Hose

Special kink and crush resistant version of 4700 design utilizing a multi-ply construction with dual special monofilament helix rods. Excellent for use in those demanding abusive transfer applications. To utilize the maximum temperature rating of the hose always permanently attach couplings

*WARNING!!

Construction:

  • Tube: Ultra high molecular weight polyethylene.
  • Reinforcement: Multiple plies of tire cord with dual monofilament helix, static wire.
  • Cover: Green EPDM rubber. Length: 100 ft.
  • Temperature Range: -40БЛF (-40БЛC) to +212БЛF (+82БЛC)
  • May be used at +250БЛF intermittent. Consult chemical resistant chart. Teflon® is a registered trademark of DuPont

*WARNING! Elevated temperatures can change the chemical resistance rating of 4705. Check the chemical resistance charts published by Novaflex to verify that the chemical to be transferred is rated for use with the UHMWP tube at the temperature & concentrations listed. Most chemicals become more aggressive the higher the temperature, reducing the ability of the tube material to withstand them. Compatibility information is available from Novaflex. If no data exists, it is the users responsibility to determine if the hose is compatible with the chemical to be transferred.

Never use Novaflex 4705 above the ratings listed by Novaflex.


Novaflex 4710

Novaflex 4710UHMW Chemical Suction & Discharge Hose

A lightweight flexible chemical transferhose designed for almost every common industrial chemical used in industry today. Non-staining UHMW tube.

*WARNING!!

Construction:

  • Tube: Clear Ultra High Molecular Weight polyethylene.
  • Reinforcement: Multiple plies of high tensile textile with dual helix
  • Cover: Green abrasion resistant green EPDM
  • (Available in blue, yellow black and grey, white – with 400ft order)
  • Length: 100 ft.
  • Temperature Range: up to -40БЛF (-40БЛC) to +250БЛF
  • (+121БЛC)
  • Consult chemical resistant chart. Not for steam service.
  • Can be open end steam cleaned

*WARNING! Elevated temperatures can change the chemical resistance rating of 4710. Check the chemical resistance charts published by Novaflex to verify that the chemical to be transferred is rated for use with the UHMWP tube at the temperature & concentrations listed. Most chemicals become more aggressive the higher the temperature, reducing the ability of the tube material to withstand them. Compatibility information is available from Novaflex. If no data exists, it is the users responsibility to determine if the hose is compatible with the chemical to be transferred.

Never use Novaflex 4710 above the ratings listed by Novaflex.


Novaflex 4800/4878

Novaflex 4800:4878dNovaflex 4800 Red Smooth Nitrile Cover

Novaflex 4878 Black Smooth Nitrile Cover

Viton Acid Suction Hose

Recommended for transfer of acid, solvents and chemicals either by pressure or gravity flow. Used as chemical transfer hose for loading tank cars, transport trucks and storage tanks.

Construction:

  • Tube: Viton. chemical and heat resistant rubber
  • Reinforcement: Plies of polyester tire cord with helix wire
  • Cover: Smooth black weather and abrasion resistant nitrile rubber
  • Length: 100 ft.
  • Temperature Range: -30БЛF (-35БЛC) to +250БЛF (+121БЛC)
  • Consult chemical resistance chart. Not for steam service, can be open end steam cleaned

Novaflex 4801 / 4879

Novaflex 4801 : 4879Viton. Acid Discharge Hose

Novaflex 4801 Red Smooth Nitrile Cover

Novaflex 4879 Black Smooth Nitrile Cover

Used as a discharge hose for highly corrosive chemicals.

Construction:

  • Tube: Viton. chemical and heat resistant rubber.
  • Reinforcement: Plies of polyester tire cord.
  • Cover: Black, weather resistant nitrile rubber.
  • Length: 100 ft.
  • Temperature Range: -30БЛF (-35БЛC) to +250БЛF (+121БЛC)
  • Consult chemical resistance chart. Not for steam service,
  • can be open end steam cleaned.

*Viton® is a registered trade mark of DuPont

PDF
Chemical Hose4

Hi-Flow Dry-Release Couplings

Advanced Fluid Handling Systems

by Novaflex

Novaflex Hi-Flow Dry-ReleaseCouplings ‘HDC’

The Next Generation in Dry-Release Technology

State of the art couplings designed to safely transfer the most aggressive and valuable product with minimum operator intervention

How it works

Turning the hose unit 15° clockwise locks the units together.

The valves are still closed and are not opened until a further rotation of 90° has been performed and then the product flow is guaranteed. To close the valves and to unlock the units, reverse the procedure.

Applications

  • Road/Rail tanker loading/ discharge
  • ISO retrofit & new build
  • IBC containers
  • Offshore rig supply
  • Pharmaceutical processing
  • Vapor Recovery
  • Ship to shore/ship/rig transfer
  • Ship manifold exchange
  • Bulk loading/discharge
  • Paints & inks
  • Marine refuelling
  • Bitumen transfer
  • Brewery
  • Food feedstock
  • Hazardous waste transfer
  • Aviation bunkering
  • Exchange manifolds
  • Blending pits
  • Rail locomotive refuelling
  • Tank top/bottom loading
  • DEF – Diesel exhaust fluid

NOVAFLEX® IS PROUD TO ANNOUNCE

THE NEXT GENERATION HI-FLOW DRY-RELEASECOUPLING – ‘HDC’

The NovaFlex Group® recognizes the need for technological advancements in the fluid transfer industry including critical Dry-Releasecoupling systems.

Developed jointly by the two industry leaders in fluid handling systems, NovaFlex and Roman Seliger engineering teams have pushed the performance boundaries of Dry-Releasecouplings. The new NovaFlex Hi-Flow Dry-ReleaseCoupling range exceeds the performance of every compatible coupling available today.

Drawing on decades of real world application experience, the NovaFlex ‘HDC’ coupling optimizes every area of function and design to deliver a truly innovative and reliable safety coupling.


Benefits of NovaFlex ‘HDC’ Hi-Flow Dry-Release Coupling Technology

  • Offshore and Marine
  • Pharmaceutical
  • Oil and Gas
  • Rail and Tanker
  • Chemical

Novaflex ‘HDC’ couplers and adapters are fully compatible with all brands conforming to NATO STANAG 3756 (PHE)

NovaFlex® through constant improvement and innovation – is committed to providing industry leading fluid transfer solutions that mitigate risk; protect personnel, property and the environment.


NovaFlex® Hi-Flow Dry-Release Couplings ‘HDC’

HDC-CPL 1½” - 2” Aluminum

HDC-ADP 1½” - 2” Aluminum

HDC-CPL 3” Stainless Steel 316L

HDC-ADP 3” Stainless Steel 316L

HDC-CPL 3” Aluminum

HDC-ADP 3” Aluminum

HDC-CPL 4” Stainless Steel 316L

 

HDC-ADP 4” Stainless Steel 316L

HDC-CPL 4” Aluminum

HDC-ADP 4” Aluminum


HDC-ADPF 2” Stainless Steel 316L

HDC-ADPF 2” Aluminum

HDC-ADPF 3” Stainless Steel 316L

HDC-ADPF 3” Aluminum

HDC-ADPF 4” Stainless Steel 316L

HDC-ADPF 4” Aluminum

 


Performance Advancement

  • High Flow Co-Efficient

  • Lower Pressure Drop

NovaFlex ‘HDC’ by RS offers the lowest pressure drop and highest flow rates in the industry. Developed from the ground up using the best expertise in the industry, this state of the art range brings numerous advancements resulting in ‘Best in Class’ flow performance, ease of use and maintenance.

In addition to minimal maintenance downtime, seal replacement costs have been reduced by up to 50%. These important advancements translate into improved transfer times, energy savings, lower cost per hour operations, including with viscous fluids, safely and reliably.

Quality Assurance

No matter which part or component, each fitting is backed by the highest quality standards. Each product is CE marked and conforms to the requirements of the European Pressure Equipment Directive; backed by ISO quality program and registered with the Technical Standards & Safety Authority TSSA (CRN registered in Canada). From the start of manufacturing to the final shipment to our customers, each product is put through rigorous inspection and testing steps along the way.Performance Advancement


Flow Comparison – Novaflex HDC with Water


Flow Rates by Coupling DiameterFlow Rates by Coupling Diameter

Flow Rates by Coupling Diameter with WaterFlow Rates by Coupling Diameter with Water

All products by Novaflex® are warranted to be free from all defects in material and workmanship.

It is impossible to test Novaflex® products under all conditions to which they might be subjected in the field. It is therefore the buyer and/or end user’s responsibility to test all Novaflex® products under conditions that duplicate the service conditions prior to installation.

Prior to any application of the information within, please read carefully the following information:

This catalogue is a guide for use in selecting the product for the correct application. It contains warnings, reference directions and directions forsafe use. All guidelines should be clearly understood before specifying or using any NovaFlex® product. Failure to follow recommended application information and recommended procedures may result in premature failure, resulting in bodily injury or property damage. Contact NovaFlex® or your local NovaFlex® distributor for assistance.

For all Novaflex® products, always consult the most recent Proper Care and Maintenance Guides and Chemical Resistance

Due to continuous improvements, technical data is subject to change without notice.


Dust Caps & Plugs  / Maintenance ToolDust Caps & Plugs Maintenance Tool


Novaflex® SBC Safety Breakaway Couplings

Eliminate Risk of Unwanted Spill in Accidental Pull-Away/Drive-Away

Safety Breakaway Couplings, a passive valve for use in virtually all fixed and flexible fluid transfer systems, offer optimum safety without work loss. The valves in both halves close automatically before the coupling disconnects completely eliminating any possible product loss in the event of an accidental drive-away or pull-away. The unique valve mechanism guarantees a high flow rate and a low pressure drop and can release at any angle of pull.

  • High flow rate/low pressure drop
  • Valves in both halves close automatically before the main fluid seal releases to the atmosphere
  • Ultra compact design encapsulated shear bolts for protection from external damage
  • Will release at any angle of pull easily re-set on-site with one person
  • Operates independently of shut off safety systems
  • Does not require an external power source
  • Used on loading arms and hose
PDF
dryrelease brochure

Comments are closed.